Insulation for exteriors with a thickness of 150

Brand: Атлон
Product Code: ППС
171 руб.

  • Availability: In Stock

This product has a minimum quantity of 16

Polystyrene intended for the works outside the building is present in the range of heaters Atlongroup. Sheets of insulation, specially prepared for installation outside. The size of these tiles makes them easy to handle when mounted on exterior walls . If the work is carried out from the construction platforms, it is very important. Clear geometric parameters contribute to a better result on the facade. The polystyrene 1000х500х150 mm we recommend to use for insulation brick walls (2 - 2.5 bricks wide). The characteristics of such a insulated plaster facade are better than those set by modern construction standards in the Northern regions of Russia. Water vapor permeability of the foam and the bricks are about the same. This uniformity is positive for the outflow of excess moisture outwards.
Discounts on comprehensive acquisition of facade materials!

Characteristics of foam:
    Brand: EPS14 Facade
    Sheet size: 1000h500h150 mm
    Price per piece: 171 rubles
    Water-resistant: YES
    The availability of Fire safety certificates: YES
    The existence of a certificate of SEZ: YES
    Availability of ISO 9001 certificates: YES
    Long-term sunlight destroys the outer layer of insulation!

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products
Related Articles

Online shop

  • 21/07/2018

Expanded polystyrene and insulation in Yekaterinburg. Repair of power tools and supply of spare parts.


Expanded polystyrene according to international standards

  • 29/08/2018

We are pleased to announce that polystyrene and products for insulation now have certificates of con..


Styrofoam from a scientific point of view

  • 18/09/2018

We consider Styrofoam from a scientific point of view


Facade insulation - possible errors

  • 19/09/2018

This article is devoted to the system of insulation of houses " wet " way. This system resembles a l..


Tags: polystyrene, foam, EPS