Foam grade 12 is used

A more dense foam in this category than the previous PPP-10 GOST. The brand is more resistant to moisture and frost. It is in demand due to the optimal characteristics and affordable prices. Thermal insulation properties of the brand are good, as in PPP 13 GOST, and the density of polystyrene foam allows you to apply a high load.

PPS 12 GOST is used for insulation of walls in the well masonry (for example, between the main wall and cladding), insulation of floors without load (for example, attic), insulation of floors (for example, between the rough and finish floors on the support logs), various outbuildings, houses for temporary accommodation, construction cabins.

Features of brand PPS 12 GOST

Perhaps the main feature can be called the density of this brand, which allows the use of foam more widely than the plate brands below. We also recommend protecting Styrofoam from the weather for a longer service life. He is not at all a" sissy", as you might think; not afraid of water, the sun burns out only after a long time. And yet, to the foam for a long time did not lose its qualities, it is better to protect. And how to protect polystyrene, you can read our article.

More dense brands choose in the section expanded polystyrene PPS, other types of expanded polystyrene can be found here.

Mounting recommendations

Cut a foam can be a stationery knife along the metal rail or cut with a conventional hacksaw. If you need a large amount of non-standard plates, please contact us! We will make calculations and try to fulfill the order in the desired size of the plates. Glue the foam with foam is better glue based on vinyl acetate, for brick and concrete surfaces, use the glue that you can buy by going here. To seal joints and to seal the tiles easier with foam. For fastening to the tree, you can use fasteners with screws, and for other bases fit Poppet dowels.

Prices and discounts

Below are the prices per cubic meter and piece for example. Prices are without discount.

Retail price

Price small wholesale

Wholesale price

The price of large wholesale

1940 RUB / m3

1840 RUB / m3

1740 RUB / m3

1710 RUB / m3

2000x1000x50mm

the price per piece was 194 RUB.

2000x1000x50mm

price per piece 184 rubles.

2000x1000x50mm

price per piece 174 rubles.

2000x1000x50mm

price per piece 171 rubles.

2000x1000x100mm

price per piece 388 rubles.

2000x1000x100mm

price per piece 368 rubles.

2000x1000x100mm

price per piece 348 rubles.

2000x1000x100mm

price per piece 342 rubles.

All price columns are subject to a discount of 4 to 7%, the terms and conditions are available by phone

+7 (343) 213-02-16

Main characteristic

Density of 12 kg/m3, thermal Conductivity 0,042 W/(m*K) Size of slabs: 4000х1000, 2000Х1000, 1000x1000, 1000х600,1000h500mm at a thickness of from 25 to 600mm.