Expanded polystyrene PPS 10

Styrofoam PPS 17 has established itself as one of the most effective and affordable materials for thermal insulation.

Atlongroup offers PPS-17 foam sheets of various sizes, conforming to GOST, guaranteeing reliable heat preservation and long service life.

This material is ideal for insulation of walls, roofs and floors, providing significant savings on heating.

It is used in modern underfloor heating systems (pipes, film, cable, mats), while achieving maximum heating efficiency and savings in heating.

With concrete floor coverings, it is also suitable for insulation and sound insulation. Screed over insulation is sufficient for attic and residential areas, and additional waterproofing will be required for a flat roof.

We recommend PPS 17 as one of the most effective and safe insulation materials. It is not an expensive and durable material. It can be used in residential and public buildings, multi-storey and low-rise buildings.

The foam base must be cleaned, leveled and primed. A smooth and solid base is a high–quality foundation for the installation of insulation. In this case, it can withstand heavy loads. The plates can be laid with one thickness butt-to-butt or mounted with two thicknesses, with a joint shift. Foam is cut with a knife, easily sawn with a hacksaw. The abutments to the walls can be sealed with mounting foam, or a damping tape can be applied. It can be attached to the concrete base with special dowels or polyurethane adhesives. A reinforced screed is placed on top of the insulation. If necessary, waterproofing (roofing) or finishing the floor (laminate, linoleum, etc.). We recommend reading the article on insulation of floors.

This brand of expanded polystyrene is characterized by increased density and strength, which makes it an excellent choice for loaded structures.

If you need PPS17 GOST foam for insulation, we suggest that you pay attention to the various standard sizes offered by Atlongroup in Yekaterinburg. From standard sheets of 50x1000x2000mm (0.1 m3), to a wide variety of formats and thicknesses. The variability of manufacturing according to your request allows you to solve any problem.

The GOST 15588-2014 standard guarantees product quality and safety.

Styrofoam PPS 17 is a modern insulation material with an extremely low coefficient of thermal conductivity, i.e. it retains heat well.

This material, previously labeled as PSB-S-25 foam, is available in thicknesses from 20 to 600 mm, which makes it possible to implement projects of any complexity, up to a freezer in a hot desert or a heat-saving house in the Oymekon region.

Do not miss the opportunity to buy PPS17-R-A foam (psbs 35T) at a bargain price. This type of foam has excellent thermal insulation properties and durability.

Main characteristics: density — 17 kg/m3, thermal conductivity - 0.038 W/(m*K).

The main sheet sizes are 4000*1000 mm, 2000*1000 mm, 1000*1000 mm, with a thickness from 20 to 600 mm.

Are you looking for high-quality insulation for your home or construction site? Styrofoam PPS 17 is a proven solution for creating a warm and cozy microclimate in your home.

We work with companies and sole proprietors.

When using the site's materials, an active link to the source is required!